SMD Soldering &Desoldering Rework Station

Two-in-one SMD Rework Station

Home > SMT/SMD Rework stations > Two-in-one SMD Rework Station

Product Abstract:

HANKE 856 is combined rework system by soldering station and hot air rework station,two in one design,economic and convenient for use.

Product Description: 2 in 1 Rework System/Repair System
SMD Soldering &Desoldering Rework Station 856

Features and Functions:

1. Tunable air flow rate,no impact from air volume.

2. Hot air gun and soldering iron work independently and set separately

3. The system is supported with the function of automatic cold wind, prevent too hot.

4. High power, fast rise of temperature, accurate and steady temperature,.

5. Adopt brushless fan with long service life and generate low noise. High quality heating element, which doubles the efficiency under the same situation, prolongs service life of the heating element and saves power consumption.

6. ESD shell design, prevent the electrostatic damaging the component.

Technical Parameter:

Soldering iron:
Heating element: 50w Ceramic heater
Power consumption : AC 24V 50w
Temperature range: 200-480 ^oC
Resistance between
Welding iron tip to ground: < 2 Ω
Voltage of welding iron tip to the grounding: < 2mV
The power line device: 1.2m

Rework station:
Power consumption Station: 270W,
Air Pump Power: 25W

Airflow : 1~23L/min in 8 grades adjustable
Temperature range: 150-600 ^oC in 8 grades adjustable
Resistance of welding
Nozzle to grounding:<2Ω
Voltage of welding nozzle to the grounding: <2mV
Power line and soft pipe :1.2m