Static digital detector

xml

Static digital detector

Home > Static control instrument > Static digital detector

Original Picture

Product Name:
Static digital detector
Model No.:
FMX-003

Product Abstract:

The outer shell is anti-static material, and a grounding wire to ensure that valid and reliable measurement results, showing numbers and graphics, and clear.

Product Description: The outer shell is anti-static material, and a grounding wire to ensure that valid and reliable measurement results, showing numbers and graphics, and clear.

Can be measured with ion balance sheet, measuring ion generator residual voltage can be measured range of + /-200V.
Field measurement range + /-20Kv * 2 LED determine the working distance 25mm
Measurements can be equipped with ion balance board (+ /-200V)
Solely according to the zero reset
Solely according to the display lock
Idle Auto-Shutdown
Battery Performance Show

Function: Effective detection of ESD in the workplace equipment, work surfaces, tools-of-band electrostatic charge.
Features: LCD / Level display test data, test data retention, digital Clear display, high / low range.
Output: red LCD display positive charge, blue LCD display negative charge measurement range: (0 ~ ± 200v low range), plus or minus 0.01kv-24kv (high range).
Test Accuracy: ± 10%
Power Supply: 9V
Accuracy: Low Range Accuracy: plus or minus 0.001kv; high range accuracy: plus or minus 1kv
Input Voltage: 9V, 6F22 manganese battery
Electrostatic field can be measured :+/-( 0.00-20.0kV) (automatically adjusted)
Standard Range: 25mm + /-1mm
Ion balance can be measured :+/-( 0-200V)
Measuring distance according to: ESD-STM3.1-2000 lonization standard
C/RH:60%R LCD display update: 5 times per second reaction time: 1 second working temperature and humidity :0-50 C / RH: 60% R
Graphic Display: Positive: red / minus: Blue Sound Alarm: On / idle automatic shutdown / beyond the range can be measured automatically shut down: idle for about 5 minutes to switch electrostatic field measurement mode: Single-click Power button, there is a beep sound of ion balance (Please Install ion balance measurement board) while you press the Power and Zero, there is a sound beeps weight / volume 0.17kg/12.3cm * 73cm * 2.5cm (with battery)

Key Note

1. Button "POWER" is the power switch.

2. Button "HOLD" is a digital lock.

3. Button "ZERO" is the number cleared.

4．Button "IB" is the unit switch.

Measurement Steps

1. By taking "POWER" button, so that the infrared lights, and then "ZERO" is cleared so that it displays zero; and then align objects being tested; (At this point, infrared light to overlap together)

2. By taking "HOLD" key, lock the static object being tested voltage value, when the recorded static pressure value, then press "HOLD" key to unlock.

When the need to measure other measured object, must click "ZERO" cleared to ensure accurate testing of static voltage.

Display

1. When the measuring instrument to the figures for the negative "-", then that is the measured object with a "negative voltage", when the device is displayed as "+", then that is the measured object with a "positive voltage."

Notes

1. In the measurements, the need to connect "grounding line" in order to avoid the measurement process, the measured object voltage is too high, and thus burn out equipment.

2. When the measurement, when the instrument's "display" show the number to 19000 volts or more (At this point, apparatus, will issue a warning sound), this time we have to instantly removed the equipment; possible causes are: ( a) Equipment burned. (B) electrostatic conductive device to the test through them too, so that the human body with the ground instantaneous discharge (ie, will electric shocks).

Related Products

[Return Home] [Print] [Go Back]

Categories

Search

Contact Us

Contact Person:
Marketing Department
Tel:
86-755-36913086 / 28761680
Fax:
86-755-33616323
Email:
marketing@hksolder.com

Subscribe