Feet body Tester

Home > Static control instrument > Feet body Tester

Product Name:
Feet body Tester
Model No.:
SL-031

Product Abstract:

routine inspection program content" inspection of the implementation of one of the tools. Human feet Integrated Tester incorporates a unique dual-test circuit design, not only can improve the test speed, and does not require a single wrist / foot strap tester. Human Integrated Tester equipped with 750KΩ-10.5MΩ circuit (used to test the wrist band), and 750KΩ-100MΩ circuit (for shoe cover test); is to test the wrist strap and shoe cover an ideal choice. Factory pre-set test parameters have been ahead of schedule, subject to adjustment in line with its own parameters to be used. The test instrument is simple and convenient. Green signal to prompt the user as usual. The red and voice prompts that the circuit resistance is too high or too low.

Product Description

Feet body Tester contact for the three kinds of states, designed to be fast, several times of individual grounding device for ESD (Functional) Testing 。 .

The product is used as a complete ANSI ESD S20.20 paragraph 6.1.3.2 "meet the certification requirements, and verify that also includes the technical requirements for routine inspection program content" inspection of the implementation of one of the tools.

Human feet Integrated Tester incorporates a unique dual-test circuit design, not only can improve the test speed, and does not require a single wrist / foot strap tester. Human Integrated Tester equipped with 750KΩ-10.5MΩ circuit (used to test the wrist band), and 750KΩ-100MΩ circuit (for shoe cover test); is to test the wrist strap and shoe cover an ideal choice.

Factory pre-set test parameters have been ahead of schedule, subject to adjustment in line with its own parameters to be used. The test instrument is simple and convenient. Green signal to prompt the user as usual. The red and voice prompts that the circuit resistance is too high or too low. ] ]

W / S for testing resistance of not less than 740KΩ, the normal range 750KΩ-10.5MΩ, the maximum shall not exceed 11MΩ. Shoe Covers the measured resistance of not less than 740KΩ, the normal range 750KΩ-100MΩ, the maximum not more than 110MΩ. Tolerance range is ± 20%.

Wrist band: 750KΩ-10.5MΩ test range		Shoe Covers: 750KΩ-35MΩ test range
Resistance (± 20%)	Test output	Resistance (± 20%)	Test output
≤ 740K Ω	Red (FAIL LO resistance low)	≤ 740K Ω	Red (FAIL LO resistance low)
750KΩ	Green (PASS OK)	750KΩ	Green (PASS OK)
10. 5MΩ	Green (PASS OK)	100MΩ	Green (PASS OK)
≥ 11.5M Ω	Red (FAIL HI resistance high)	≥ 110M Ω	Red (FAIL HI (high resistance)

Note:

A. Wear a wrist band, can be (wire) plug tester inserted into the front end of the socket location.

B.Switch placed in the "WRIST CORD" position.

C.Press the test button to start testing instrument can be 2-3 seconds to start testing equipment.

Note: The test, touch the metal parts should not be misled.

D. Green light "to the normal (PASS)" LED lights to show the wrist and grounding of electrical wiring and functioning properly.

E.If the "FALT LO" or "FALL HI" LED lights frequently complicated by silent alarm, the wrist band to wear are required to immediately check the wrist band device is normal.

Related Products

[Return Home] [Print] [Go Back]